Skip to main content
Call 512.689.8346

Tenant finish-out in Austin and nearby

White Box & Shell Finish-Out in Austin

Have a deadline? Call or text 512.689.8346 with the address, square footage and date. We'll tell you on that call whether we can make your date.

Call 512-689-8346 Text 512-689-8346

Bailey & Bear builds out white box and shell space for Austin-area tenants, including retail and studio finish-outs and 2nd-generation suites. Send approved drawings, we walk the space, and you receive a lump-sum written bid with landlord work called out as by others. Call or text 512-689-8346.

Send drawings, get a lump-sum bid

New lease, issued permit, TDLR TABS registration or drawings in hand for your shell or white-box space? Send the drawings and the landlord work letter. We walk the space, then send one lump-sum bid and a schedule: drawings → walk → bid → schedule.

See commercial finish-outs in Austin, how we bid your finish-out and what to send us.

Send drawings with the project form.

White box finish out contractor in Austin: shell finish out and tenant buildout for owners, tenants and property teams across the Austin area. Call or text 512-689-8346 or send plans for a bid.

Related commercial contractor work in Austin

Pick the page closest to your space.

How a commercial bid moves from plans to schedule in Austin

Four steps, in this order.

  1. Send the plans or scopePlans, an ITB or RFQ, or a short written scope.
  2. Walk the spaceWe look at the site against your documents.
  3. Get a written bidA scope and bid you can compare line by line.
  4. Schedule the workSequence and access agreed before work starts.

What to send for a white box finish out bid in Austin

Send what you have and note anything that is missing.

  • Plans or drawings, or a written scope if there are none
  • Address, suite number and who to send the bid to
  • Photos of the space and the bid due date
  • The lease exhibit or landlord work letter
  • Building standards and landlord approval steps
  • TI allowance terms, if you have them
Read the full bid checklist

Questions about commercial work in Austin

Who can I call for white box finish out contractor in Austin?

Call or text Bailey & Bear Construction at 512-689-8346, or send plans or a scope through the contact page. We bid this work in Austin and nearby cities.

What should I send to get a bid?

Send: plans or drawings, or a written scope if there are none; address, suite number and who to send the bid to; photos of the space and the bid due date; the lease exhibit or landlord work letter; building standards and landlord approval steps; tI allowance terms, if you have them. A partial set is fine; note anything that is missing.

Where can I find white box finish out contractor near me?

Bailey & Bear Construction works in Austin and nearby cities including Round Rock, Cedar Park, Georgetown, Pflugerville, Lakeway, Bee Cave, Kyle and Buda.

How much does a white box finish out cost?

It depends on the scope, the building and the finish level, so this page does not give a number. Send plans or a scope and ask for a written bid.

What counts as tenant improvement work?

Tenant improvement work adapts a leased space to its tenant: walls, ceilings, flooring, millwork, restrooms and trade work, usually set by the lease and the landlord work letter.

White box and shell finish-out in Austin

A white box or vanilla shell is a leased space with the basics delivered and the tenant finishing the rest. Bailey & Bear builds that finish-out in Austin and about 30 miles around: walls, ceilings, restroom, lighting, HVAC distribution and floors. We walk the shell, then send a written lump-sum bid.

What should I check in a shell space before signing a lease for a finish-out?

Ask the landlord exactly what is delivered: HVAC, electrical service, plumbing stub-outs, restroom, and demising walls. Gaps there become tenant cost. We can walk the space with you before you commit and then give a written lump-sum bid that shows what the finish-out needs beyond the delivered shell.

Call or text 512-689-8346, Mon-Sat 8 AM-6 PM.

What to send us

A short starting set lets us walk the space with the right information in hand.

  • Drawings, approved or in review
  • The landlord work letter
  • Your target open date
  • The suite address

Text us the drawings

How a finish-out bid works

1. You send drawings

Send the approved drawings, or the set that is in review, along with the landlord work letter.

2. We walk the space

We walk the suite to confirm existing conditions, what the landlord is delivering and what stays or goes.

3. You get a written bid

You receive a lump-sum written bid for the tenant-side scope. Landlord work is called out as by others.

Landlord work, such as the rooftop unit, curb, roof opening and plenum drops, stays with the landlord and is listed as by others. We can include the tenant-side ductwork and the condensate drain in our scope, and we sequence our crews around the landlord’s work.

Shell, white box, retail and studio finish-outs

Shell and white box

A suite delivered with basic finishes and no tenant layout. We build the partitions, ceilings, floors, lighting and finishes your drawings call for.

Retail and studio

Storefront interiors, sales floors, fitting rooms, studio rooms, reception and back-of-house space, built to the approved drawings.

2nd-generation space

A suite a previous tenant already built out. We scope selective demolition and changes so you reuse what makes sense.

Finish-out questions tenants ask

What is a white box space?

A white box, sometimes called a vanilla shell or warm shell, is a commercial suite a landlord hands over with basic finishes and no tenant-specific layout. What is actually delivered varies from building to building, so the landlord work letter is what defines it for your suite.

What does a tenant finish-out include?

Tenant-side finish-out generally covers partitions, ceilings, flooring, paint, doors and hardware, storefront interiors, lighting and power, tenant-side ductwork and the condensate drain, plus coordination with inspections. The exact list depends on your drawings and your lease.

Who pays for finish-out, the landlord or the tenant?

It depends on the lease. Some leases include landlord work or a tenant improvement allowance, and the tenant covers the rest. The lease and the landlord work letter spell out the split, and your broker or attorney is the right person to confirm it. We price only the tenant-side scope.

How long does a finish-out take?

We do not promise a timeline up front. The schedule is driven by permit review, whether drawings are approved or still in review, long-lead items such as storefront, lighting and equipment, when landlord work is complete, and inspections. We build the schedule with you once we have walked the space.

What is a 2nd-generation space?

A 2nd-generation space is a suite a previous tenant already built out. Walls, ceilings, restrooms and mechanical may be reusable, so the scope is often selective demolition and changes to fit the new layout instead of a full build from bare shell. We confirm what stays when we walk it.

Who handles landlord work such as the rooftop unit or roof opening?

Landlord work is called out in our bid as by others. That includes items such as the rooftop unit, curb, roof opening and plenum drops. We sequence our tenant-side work around it and can include the tenant-side ductwork and condensate drain in our scope.

Do you finish out white box space in Leander, Cedar Park and Round Rock?

Yes. Bailey & Bear finishes out white box and shell suites in Austin and nearby cities, including Leander, Cedar Park, Round Rock, Georgetown and Pflugerville. Send the drawings and the landlord work letter, we walk the suite, and you get a written lump-sum bid with landlord work called out as by others.

These answers are general information, not legal or financial advice. Your lease and your landlord work letter control.

Before you sign: how the bid and changes work

How the lump-sum bid works

One written price for the scope in your drawings or photos. Open questions are written down as clarifications instead of guessed.

Clarifications and exclusions

Anything we are not pricing, such as landlord work or owner-supplied equipment, is listed as an exclusion or as work by others before you sign.

How change orders work

If the scope changes or we find a hidden condition, the change is written up with its price and agreed in writing before that work starts.

Where cost can come out

If the first number is over budget, we go line by line: what can be reused, what can change in finish level and what has to stay.

Often found once we open it up. A shell can hide a thin or uneven slab and utilities that stub in somewhere other than the drawings show. See commercial concrete, commercial plumbing and drainage and commercial flooring and subfloor.

Opening a studio or a franchise location in a shell or second-generation suite? See studio and franchise finish-outs. Have a bid set? You can send your ITB, RFQ or plan set.

Ready to price a finish-out? See what to send us for a fast quote and how we bid your finish-out.

Send your plans for a bid in Austin

Use the contact page, or call or text 512-689-8346.